Post & Mounting

Mounting engineered for stability and designed with sign fit and finish in mind.

Construction	One piece 0.080 extruded Aluminum Post with 6”sq. welded base plate Engineered for sign mounting on one side
Dimensions	2¼” x 3”
Post Lengths	40”, 60”, 90” with base plate, 60”, 90”, 120” without base plate 120” without base plate only Post can be cut to length
Finish	Duranodic Bronze; Custom paint finishes available
Installation Method	Surface mount Posts with a base plate Direct burial mount Post without base plate
System Uses	Center Post mount can be used for signs up to 26” wide. Double Post mount can be used for all signs. Both Center Post and Double Post with base plates can be inverted for pendant style mounting

Construction	One piece 0.115 extruded Aluminum Post 12”sq. welded base plate with gussets Fluted edge design Engineered for sign mounting on four sides
Dimensions	4” x 4”
Post Lengths	40”, 60”, 90”,120”; Post can be cut to length
Finish	Duranodic Bronze; Custom paint finishes available
Installation Method	Surface mount Posts with a base plate
System Uses	Use when mounting signs over 12 sq ft Use when surface mounting signs on posts over 90” high

Construction	Formed 1/8” CNC routed aluminum. Pre-drilled holes for mounting to sign
Dimensions	Recommended wall opening is ½” wider and higher than sign dimension
Finish	Duranodic Bronze; Custom paint finishes available
Installation Method	Bolts to wall surface (fasteners not included). Ships separate from sign.
System Uses	Used on all sign series

Construction	1⁄8” extruded aluminum L-shaped bracket with pre-drilled mounting holes
Dimensions	4” x 2” x various widths
Finish	Duranodic Bronze, custom paint finishes available
Installation Method	Bolts to wall or ceiling surface (Surface mounting hardware not provided)
System Uses	For use on single or double-faced signs. Compatible with the following sign series: TCL, TCIL, PHX, PHXF, SBL and SBLF

Construction	Formed 3/16” Aluminum bracket with stainless steel hardware
Dimensions	3” x 10” x 4.75”, 2.5” x 19.875” x 4.375”, 2” x 4.75” x 5.625”
Bracket Lengths	Varies to fit back of sign cabinet
Finish	Duranodic Bronze; Custom paint finishes available
Installation Method	Bolts to wall surface (fasteners not included)
System Uses	Used to mount signs to roofs or fascias to create the ideal angle. The bracket can be locked to any angle between 15 and 90 degrees.