Outdoor/indoor blank-out signs with an IP66/NEMA 4X cabinet, narrow angle LEDs and contrasting black face. The sign message is formed by visible LEDs that illuminate when activated and blank-out when deactivated.
| Electrical | Input voltage: 120-240VAC or optional 9-24VDC
UL/cUL Listed for wet locations |
| Control | Switch or external relay |
| Number of Inputs | One input (Line or +) per message
One common (Neutral or -)
One Earth Ground |
| Input Connection Type | Stripped end, 18AWG wire
Options available (below) |
| Load Type | Capacitive
Components in a system designed to control resistive loads (e.g., an incandescent lamp) may not be suitable. |
Power Supply Efficiency
(@120VAC, 50% rated load) | 81% |
| Surge Protection | None
Optional: DIN Rail mounted surge protectors |
| Power Supply Configuration | Non-redundant
Optional: Redundant power supplies |
| UL/cUL Listed | Yes (for wet locations) |
| IP/NEMA Rating | IP66/NEMA 4X |
| Temperature and Humidity Ratings | The Cabinet and sign components shall operate in the following temperature and humidity conditions:
- Operational & storage temperature range: -40°F to +165°F
- Humidity range: 0% to 99% (non-condensing)
|
| Face Material | 0.125” thick, tinted, matte, impact-modified acrylic |
| Cabinet Construction | 0.125” thick 6063-T6 aluminum alloy extruded cabinet with welded seams, stainless steel hardware and hinged face(s).
All exterior seams shall be continuous MIG welded to form a single structure.
The hinged face(s) shall be attached to cabinet using a full-length extruded hinge.
The cabinet face is flanged on all sides to shed water.
The door closes around its flanged frame and is compressed against a closed-cell silicone gasket. |
| Cabinet Depth | Single-faced: 6.50" |
| Cabinet Finish | Standard: Powder coated Black
Options: Custom paint colors or custom color match paint |
| Cabinet Interior (physical) | Conformal coated circuit board, NEMA 4X breather drain (for atmospheric pressure equalization), sealed/closed-end fasteners used for optional, installed mounting interface |
| Mounting | Mast Arm Bracket Assembly (purchased separately) |
| LED Drive Current | 15mA per string
String length varies per color |
| Automatic Photo-Dimming | Single photocell, IR-sensitive, gradual brightness adjustment
Optional: Redundant photocells |
| Message Flashing | Adjustable speed/pattern, set from factory
OFF by default |
| Message Face | Black message board protected by tinted, matte (glare-reducing) window
See Physical/Environmental for face construction |
| LED Color/Brightness |
| LED Color (Type/Temp) | Viewing Angle: Narrow
(mcd, typ.) | Viewing Angle: Wide
(mcd, typ.) |
| Red (625nm) | 3750 | 660 |
| Amber (589nm) | 3900 | 780 |
| Green (525nm) | 7500 | 1200 |
| Blue (470nm) | 1500 | 210 |
| White (5500K-6500K) | 4350 | 1375 |
|
| LED Viewing Angle | Narrow 30° cone (15° from center axis)
Optional: Wide-angle 120° cone |
| Input Voltage | 100-240VAC
Optional: 9-24VDC |
| Input Connection Type | Stripped end, 18AWG wire
Tool-actuated terminal blocks (DIN rail)
Lever-actuated terminals (DIN rail) |
| Surge Protection | None
20kA DIN rail mounted surge protectors |
| Power Supply Configuration | Single
Redundant (at least two per message) |
| Hood/Visor | None
6” depth (from face) |
| Mounting | Rivnut array
C-Channel (bolt-on)
Mounting tabs
SkyBracket mast arm mount (vertical or horizontal)
Skybracket top/bottom elbow mount (with locking, serrated ring)
Integrated locking, serrated ring (top and bottom) |
| Photcells | Single
Redundant (x3) |
| Message Flashing | None (adjustable on photodimmer board)
Custom (pre-set from factory |
| LED Viewing Angle | Narrow 30° cone (15° from center axis)
Wide 120° cone (60° from center axis) |
Download DOT Series Specifications