News & Articles

• Remove screws from the cabinet and remove back of sign
• Locate dial on the flasher module. (see photos below)
• Turn dial with a 2mm flathead (5/64") to the desired flash rate
• Typical factory standard flash rate is 55fpm when the dial is turned all the way to the right. When the dial is turned counter-clockwise from factory standard position, the flash rate starts at 6fpm and will increase to 300fpm as you continue to turn it counter-clockwise, resulting in the following:
  • Counter-clockwise = speed up flash rate
  • Clockwise = slow down flash rate

Photos: